PetFinder GPS Tracker for Pets: English User Manual

Introduction for PetFinder GPS Tracker unit for pets user guide in English.

Unleash the power of effortless tracking with our cutting-edge Bluetooth wireless device, seamlessly integrated with the 'isearching' application. Pair it with your frequently misplaced belongings and experience a new level of convenience. With an impressive Bluetooth connection range of approximately 25 meters (75 feet with no barriers), locate your belongings effortlessly. Activate the beep feature through the app, make your phone ring with a double-click, or even snap photos using the button located on the device. Say goodbye to the hassle of searching for keys, bags, remote controls, wallets, and phones – our product ensures you find what matters most with unparalleled ease.

Key Features of the App

• Bluetooth Range: Approximately 25 meters (75 feet with no barriers)
• Beep Function: Activated via the app
• Phone Alarm: Double-click to make the phone ring
• Camera Function: Use the device button as a remote shutter to take photos

Security and Convenience

When the device is out of your phone's Bluetooth range, dual alerts are received on both the device and your phone, ensuring you never miss a beat. The 'isearching' app will mark the last known location on the map. To unlock this feature, simply activate the 'Phone Alarm While Lost' function in the settings. Safeguard your belongings and phone within a certain range, receiving timely reminders if you forget to take them along. Our product ensures you stay connected and protected.

Compatibility Requirements

• Bluetooth: Version 5.2
• Operating System: iOS (8.0 or later) or Android (4.4 or later)

App Download and Installation

You can download the 'isearching' app from:

1. App Store
2. Google Play

Power On/Off

• Power On: Press and hold the tracker’s button for at least 3 seconds to turn the device on. You will hear two beeps to indicate the device is turned on.
• Power Off: Press and hold the tracker’s button for at least 3 seconds to turn the device off. You will hear a long single beep to indicate the device is turned off.

Transparent Insulation Sheet

Remove the transparent insulation sheet to start using the device and enjoy a long-lasting battery life.

Using the App

1. Launch the app on your smartphone. Take a moment to check the tutorial page, and don't forget to tap 'Allow' to turn on the app’s notifications.
2. Use the menu to add devices.
3. You can use the app to find your misplaced phone by pressing the device button twice to trigger an alert on your phone. Tap 'Confirm' to stop the alert.
4. Go to settings to change the device name (e.g., Wallet, Key, Dog, etc.) and save a picture for future reference.

History Features

• Location History: When you park your car, simply press the tracker's button to mark your current location on the map. To locate your vehicle, just tap 'Location History'.
• Lost History: In case you misplace your tracker, find it effortlessly in the 'Lost History'. A pin will be dropped automatically on the map, providing you with the tracker's location.

Taking Selfies

1. Tap 'Camera' to open the camera, then press the connected tracker's button to capture a photo, functioning as a remote shutter.
2. Easily switch between the front and rear cameras.

Battery Replacement

• Battery Type: CR2032
• To replace the battery, simply open the tracker's button serving as the battery cover.

Enable 'Do Not Disturb'

To deactivate the alarm function on all devices, enable 'Do Not Disturb'.

Alarm and Voice Recording Settings

The settings for alarm and voice recordings are stored in the app where you can manage them.

Trademarks

Apple, App Store, iPhone, iPad, and iPod touch are trademarks of Apple Inc. Google Play is a trademark of Google Inc. All other trademarks used herein are the property of their respective owners.

For further assistance, refer to the full user manual or contact customer service. Ønsker du manualen på dansk, kan den findes her.